Sangoma A40701D Information:
This Sangoma A40701D PCIx card supports 14 FXS and 2 FXO - This card will support an Asterisk configuration that requires connectivity for up to 14 Station device and 2 POTS lines.
The Sangoma A40701D is part of the Sangoma A400 series. The Sangoma A400 series is the high density version of the popular A200 series analog cards. Identical in operation and configuration, and using the same FXO and FXS modules, the A400 system supports twelve ports per main board and Remora daughtercard,as compared to four ports for the A200.The A400 and Remora System Support up to 24 FXO/FXS ports.
As you need them, additional Remora cards can be added to the A40304E card. A single PCI or PCI Express slot host connection can support up to 24 FXO/FXS ports with common synchronous clocking for all channels.The Sangoma A400 Card consists of an A400 Remora daughterboard mounted on the Sangoma AFT Series PCI or PCI Express base card. The A400 Remora Card has six sockets each, which can accept an FXO-2 or FXS-2 module. Each FXO-2 or FXS-2 module supports two FXO or FXS lines respectively.
Up to one additional A400 Remora daughterboards can be mounted in empty slot positions beside the A400 Remora assembly. These additional Remoras are connected to the A400 by a backplane bus connector.Each 12-port A400 Remora card has a robust DB25 connection to a standard 12-line, colour-coded telephone cable that is ready for hard wiring into a punch block at the PSTN connection. Cable is included.Like all the Sangoma AFT Series, the A40304E and Remora system has field upgradeable firmware to take advantage of enhancements as they become available.
Not Sure Which Sangoma Card is Right for You? Click here! An .e4 Sangoma expert will be happy to assist you.
|Free Shipping||Free Ground Shipping|