DrayTek VigorAP 800 WiFi AP/Repeater Information:
The dynamic DrayTek VigorAP 800 is an impressive wireless Access Point with MIMO technology and Power over Ethernet support. This product from DrayTek allows users to have the most advanced wireless network standard for the coverage backward compatible with 802.11b/g standard. In addition to that, users will enjoy easy AP deployment no matter where the power plug is. And that's not all, because the DrayTek VigorAP 800 gives users dependable and secure wireless local area networks (WLANs) through the easy but sturdy management and configuration.
The DrayTek VigorAP 800 features PoE support which will significantly easy the deployment process by running only one cable to the VigorAP 800. That lone cable will handle both power and data. You also have the optioin to mount the DrayTek VigorAP 800 to the place which is best for extending coverage without considering if there is ready access to a power plug. Of course, you can also use the included AC adapter if power is available nearby.
DrayTek applies smart wireless prioritization technology into the DrayTek VigorAP 800 for the very best utilization of wireless coverage. The DrayTek VigorAP 800 supports Wi-Fi Multi Media standard (WMM) which is a standard designed to interpret Quality of Service in and among Wi-Fi networks. It is a precursor to the upcoming IEEE 802.11e WLAN QoS draft standard, which is meant to improve audio, video and voice applications transmitted over Wi-Fi. WMM adds prioritized capabilities to Wi-Fi networks and optimizes their performance when multiple concurring applications, each with different latency and throughput requirements, compete for network resources.
The DrayTek VigorAP 800 supports four unique SSIDs and 2 VLANS (virtual LANS). You have the ability to configure certain SSID(s) to access Internet through either VLAN 1 or 2. The DrayTek VigorAP 800 then divides itself into numerous virtual access points that are contained within a single hardware platform. Many mobile networks deployed at corporate offices, hotels, shopping malls or restaurants can take advantage of this technology to support several applications such as public Internet access and inventory management. For example, guests of a company could be given wireless access for the Internet, but they are excluded from any access to the internal data server. For home users, they can set up different authorization for SSIDs to their K12 kids, young adults and parents to avoiding inappropriate contents accessed by underage family members.
With the DrayTek VigorAP 800, you have the ability to access the MAC addresses of each wireless client from its configuration utility or operating system. You then enter these addresses into a configuration page of VigorAP 800. When MAC address filtering is activated, the DrayTek VigorAP 800 performs an additional check for wireless clients to ensure there are no network breaks. Clients within the authenticated list will be able to join with the WLAN. Those who are not on the list will be denied while VigorAP 800 receives their request to join the WLAN. With industry level security standards for wireless user authentication and data encryption, 802.11i (WPA2) offers strengthened and interoperable wireless networking security. The activation of 802.1x RADIUS (Remote Authentication Dial-in User Service) allows you centrally manage and store user names and passwords. You can ensure that only legitimate clients can be associated with corporate RADIUS servers.
The DrayTek VigorAP 800 has the ability to extend over huge areas by using its wireless distribution system. WDS takes care of the establishment of WLAN network with "point-to-point" and "point-to-multipoint" bridging and repeater modes. The repeater mode provides extend wireless access to additional clients where there is a relay AP repeats signal from a base AP to distant clients. The bridge-to-bridge mode allows two wired networks to be connected across some distance. The detachable antenna will let you replace with DrayTek antennas for directional signal shaping or mounting flexibility.
You have the ability to connect a printer to the USB port of the DrayTek VigorAP 800 for users from wired PC or wireless network. When you are using a pair of VigorAP 800s to make a bridge, the aforementioned printer can be installed elsewhere in your workspace.
Business-class IEEE 802.11n WLAN access point
Supports 802.3af PoE-PD
Wi-Fi multimedia (WMM) quality of service features
Comprehensive and trusted security
Supports 4 SSIDs
Operation modes: access point, wireless client, wireless distribution system (WDS) with access point, WDS/bridge (No AP broadcasting)
TR-069 for LAN-A: firmware upgrade, configuration backup and restore
Embedded USB printer server
Mfg. Part Number: VIGORAP 800
Still not sure which DrayTek product is right for you? Click Here For Live Assistance! You can also call us toll free at 877.434-8647- Our online team of experts will be happy to create a custom quote for you.
|Free Shipping||Free Ground Shipping|
You have no items in your quote.